Konjac Oligosaccharides Alleviated Ovariectomy-Induced Bone Loss through Gut Microbiota Modulation and Treg/Th17 Regulation.

Oligosaccharides from the plant Amorphophallus konjac were potentially effective in menopausal osteoporosis due to their prebiotic attributes. The present work mainly studied the regulation of konjac oligosaccharides (KOS) on menopausal bone loss. Experiments were carried out in ovariectomized (OVX) rats, and various contents of KOS were correlated with diet. After 3 months of treatment, the degree of osteoporosis was determined by bone mineral density and femoral microarchitecture. The research data showed that the 8% dietary KOS significantly alleviated bone loss in OVX rats, as it promoted the bone trabecular number by 134.2% and enhanced the bone bending stiffness by 103.1%. From the perspective of the gut-bone axis, KOS promoted gut barrier repair and decreased pro-inflammatory cytokines. Besides, KOS promoted the growth of Bifidobacterium longum and restored Treg/Th17 balance in bone marrow. The two aspects contributed to decreased osteoclastogenic activity and thus inhibited inflammation-related bone loss. This work extended current knowledge of prebiotic inhibition on bone loss and provide an alternative strategy for osteoporosis prevention.

Preparation of a novel expandable konjac fiber at different freezing temperatures and exploration of its digestion regulation functions.

A new form of konjac fiber was successfully prepared, and it could instantaneously expand when in contact with the digestive fluid. The expanded konjac fiber could inhibit the digestion of the ingested food by competing with the substrate for digestive enzymes and space. The konjac fiber with desirable physical properties was obtained at 4 different freezing temperatures (-20 °C, -40 °C, -80 °C, and -196 °C), and the digestion regulation mechanisms of these fibers were systematically explored. The results showed that the konjac fiber prepared at -20 °C displayed an outstanding performance in delaying gastric emptying and preventing intestinal starch hydrolysis, while the fiber prepared under liquid nitrogen conditions (-196 °C) showed the weakest digestion regulation ability. However, the digestion regulation ability of this novel fiber was highly related to the food rheological property, and it exhibited a stronger interference effect on high-viscosity food. Our novel konjac fibers exhibited a great digestion regulation potential. Our findings provide valuable references for the development of dietary fiber-based satiety-enhancing functional foods.

Study on the interaction and gel properties of pork myofibrillar protein with konjac polysaccharides.

BACKGROUND: Natural myofibrillar protein (MP) is sensitive to changes in the microenvironment, such as pH and ionic strength, and therefore can adversely affect the final quality of meat products. The aim of this study was to modify natural MP as well as to improve its functional properties. Therefore, the quality improvement effect of konjac polysaccharides with different concentrations (0, 1.5, 3, 4.5 and 6 g kg-1 protein) on MP gels was investigated. RESULTS: With a concentration of konjac polysaccharides of 6 g kg-1 protein, the composite gel obtained exhibited a significant improvement of water binding (water holding capacity increased by 7.71%) and textural performance (strength increased from 29.12 to 37.55 N mm, an increase of 8.43 N mm). Meanwhile, konjac polysaccharides could help to form more disulfide bonds and non-disulfide covalent bonds, which enhanced the crosslinking of MP and maintained the MP gel network structure. Then, with the preservation of α-helix structure (a significant increase of 8.11%), slower protein aggregation and formation of small aggregates, this supported the formation of a fine and homogeneous network structure and allowed a reduction in water mobility. CONCLUSION: During the heating process, konjac polysaccharides could absorb the surrounding water and fill the gel system, which resulted in an increase in the water content of the gel network and enhanced the gel-forming ability of the gel. Meanwhile, konjac polysaccharides might inhibit irregular aggregation of proteins and promote the formation of small aggregates, which in turn form a homogeneous and continuous gel matrix by orderly arrangement. © 2023 Society of Chemical Industry.

Characteristics of Amorphophallus konjac as indicated by its genome.

Amorphophallus konjac, belonging to the genus Amorphophallus of the Araceae family, is an economically important crop widely used in health products and biomaterials. In the present work, we performed the whole-genome assembly of A. konjac based on the NovaSeq platform sequence data. The final genome assembly was 4.58 Gb with a scaffold N50 of 3212 bp. The genome includes 39,421 protein-coding genes, and 71.75% of the assemblies were repetitive sequences. Comparative genomic analysis showed 1647 gene families have expanded and 2685 contracted in the A. konjac genome. Likewise, genome evolution analysis indicated that A. konjac underwent whole-genome duplication, possibly contributing to the expansion of certain gene families. Furthermore, we identified many candidate genes involved in the tuber formation and development, cellulose and lignification synthesis. The genome of A. konjac obtained in this work provides a valuable resource for the further study of the genetics, genomics, and breeding of this economically important crop, as well as for evolutionary studies of Araceae family.

Selection and Evaluation of Reference Genes for RT-qPCR Analysis in Amorphophallus Konjac Based on Transcriptome Data.

Combined with the Konjac transcriptome database of our laboratory and internal reference genes commonly used in plants, the eight candidate internal reference genes were screened and detected. They are the 25S ribosomal RNA gene (25S rRNA), 18S ribosomal RNA gene (18S rRNA), actin gene (ACT), glyceraldehyde-3-phosphate dehydrogenase gene (GAPDH), ubiquitin gene (UBQ), ß-tubulin gene (ß-TUB), eukaryotic elongation factor 1-αgene(eEF-1α), and eukaryotic translation initiation factor 4α-1 gene (eIF-4α). The results of GeNorm, Normfinder, and BestKeeper were analyzed comprehensively. The data showed that the expression levels of 25S rRNA, 18S rRNA, and ACT at the reproductive periods, eEF-1α and eIF-4α at the nutritional periods, and eEF-1α, UBQ, and ACT at different leaf developmental periods were stable. These identified and stable internal reference genes will provide the basis for the subsequent molecular biology-related studies of Konjac.

Evaluation of konjac noodle as a microsurgery training model: learning curve analysis.

BACKGROUND: classical models of microsurgical anastomosis training are expensive and have ethical implications. Some alternatives join low cost and easiness to store. However, the translation of knowledge acquired by training in these methods into the traditional ones is not clear. This project aims to assess the feasibility of konjac noodles as a reliable microsurgery-training model. METHODS: 10 neurosurgery residents performed an end-to-end anastomosis in a 2-3mm placenta artery. The anastomoses were evaluated quantitatively, recording time; and qualitatively, applying a validated score (Anastomosis Lapse Index - ALI) by three experienced neurosurgeons and verifying the presence of gross leakage through the infusion of fluorescein. Subsequently, they performed 10 non-consecutive sessions of anastomosis training in the konjac noodle. Eventually, a final anastomosis in the placenta model was performed and the same parameters were scored. RESULTS: we observed a 17min reduction in the mean time to perform the anastomosis in the placenta model after the training in the konjac (p<0.05). There was a non-significant 20% reduction in gross leakage, but the training sessions were not able to consistently improve the ALI score. CONCLUSIONS: we demonstrate a reduction in anastomosis performing time in placental arteries after training sessions in the konjac noodle model, which can be regarded as a feasible low-cost method, particularly useful in centers with surgical microscopes only in the operation room.

Konjac glucomannan-based hydrogels with health-promoting effects for potential edible electronics applications: A mini-review.

Konjac glucomannan (KGM), a dietary fiber hydrocolloid polysaccharide isolated from Amorphophallus konjac tubers, has potential applications in various fields. However, the use of KGM-based hydrogels has mainly focused on the food, biomedical, and water treatment industries. KGM possesses several health benefits and could be a promising candidate for use in edible electronics. This paper presents the first review of KGM-based hydrogels as edible electronics and their potential health benefits. The paper initially focuses on the health-promoting effects of KGM-based hydrogels, such as prebiotic effects, antiobesity, antioxidant, and antibacterial properties. Then, it discusses the feasible design strategies for KGM-based hydrogels as edible electronics, considering their flexibility, mechanical properties, response to stimuli, degradability aspects, their role as electronic device components, and the retention period of the devices. Finally, this review outlines future directions for developing KGM-based hydrogels for use in edible electronics.

Influence of hydrophilic polysaccharide fat replacers on the in vitro digestibility of protein in emulsion-type sausage.

Hydrophilic polysaccharides have been widely applied as fat replacers in meat products, but their effects on the digestibility of meat proteins has seldom been studied. Replacement of backfat in emulsion-type sausage with konjac gum (KG), sodium alginate (SA) and xanthan gum (XG) were found to reduce the released amino group (-NH2) during simulated gastric digestion and initial intestinal digestion. The suppressed gastric digestibility of protein was verified by the denser structures of protein gastric digests and reduced generation of peptides in gastric digestion when a polysaccharide was added. After the whole gastrointestinal digestion, high level of SA and XG resulted in larger digests and a more obvious SDS-PAGE band between 5 and 15 kDa, and KG and SA significantly reduced the total release of -NH2. Additional of KG, SA and XG were found to the increase the viscosity of the gastric digests mixture, which could account for the reduced hydrolysis efficiency of pepsin during the gastric digestion, as evidenced in the pepsin activity study (decreased by 12.2-39.1%). This work highlights the influence of polysaccharide fat replacer on the digestibility of meat protein by changing the matrix characteristics.

Bacterial community structure in the rhizosphere of fungi-infected Amorphophallus titanum.

The rhizosphere is a narrow soil area directly affected by plant root exudates. Microbes inhabiting the rhizosphere have been widely studied for their beneficial effects on plant nutrition, growth, and disease prevention. Many factors affect the rhizosphere microbial composition, including plant pathogen infection. Here, we analyzed the bacterial community structure in the rhizosphere of fungi-infected Amorphophallus titanum. Soil samples were collected from rhizosphere and non-rhizosphere areas of fungi-infected A. titanum. The 16S metagenomic analysis was conducted to investigate the bacterial community of the samples by amplifying the V3-V4 region. The results showed that the phylum Firmicutes was prevalent in the rhizosphere, whereas the phyla Proteobacteria, Acidobacteria, and Actinobacteria were limited. Some major fungal genera were isolated from infected tubers and rhizosphere soil of A. titanum, including Trichoderma sp., Aspergillus sp., Perenniporia sp., and Cerrena sp. The fungal-isolate Aspergillus spp. is a well-known agricultural pest in several reports. While Cerrena sp. was reported to be pathogenic in plants, including the family of Arecaceae. Overall, the data revealed a potential relationship between fungal infections and the dominant bacterial community in the rhizosphere of A. titanum. Additionally, this research may contribute to the development of microbe-based technology to mitigate diseases in A. titanum.

Patterns and drivers of heat production in the plant genus Amorphophallus.

Thermogenesis - the ability to generate metabolic heat - is much more common in animals than in plants, but it has been documented in several plant families, most prominently the Araceae. Metabolic heat is produced in floral organs during the flowering time (anthesis), with the hypothesised primary functions being to increase scent volatilisation for pollinator attraction, and/or to provide a heat reward for invertebrate pollinators. Despite in-depth studies on the thermogenesis of single species, no attempts have yet been made to examine plant thermogenesis across an entire clade. Here, we apply time-series clustering algorithms to 119 measurements of the full thermogenic patterns in inflorescences of 80 Amorphophallus species. We infer a new time-calibrated phylogeny of this genus and use phylogenetic comparative methods to investigate the evolutionary determinants of thermogenesis. We find striking phenotypic variation across the phylogeny, with heat production in multiple clades reaching up to 15°C, and in one case 21.7°C above ambient temperature. Our results show that the thermogenic capacity is phylogenetically conserved and is also associated with inflorescence thickness. Our study paves the way for further investigations of the eco-evolutionary benefits of thermogenesis in plants.

Mulberry leaf and konjac compound powder improves the metabolic capacity of old mice on a high-protein diet by regulating the structure of the intestinal microbiota.

BACKGROUND: The health of elderly individuals is closely linked to their protein intake and the abundance of intestinal microbiota. To investigate the impact of a compound powder made from mulberry leaf and konjac (hereinafter referred to as 'compound powder') on regulating the structure of intestinal microbiota in 15-month-old BALB/c mice that were fed a high-beef-protein diet, 16S rRNA high-throughput sequencing, reverse transcription quantitative polymerase reaction, western blot, and other biochemical methods were used to analyze the differences in intestinal microbiota, protein metabolism-related genes, short-chain fatty acid (SCFA) content, and serum cytokines. RESULTS: The results showed that the compound powder increased the content of SCFAs, reduced the inflammatory reaction of the body, adjusted the abundance of intestinal microbiota (Firmicutes and Bacteroidetes), and increased the ratio of Firmicutes to Bacteroidetes (F/B). Moreover, the compound powder could increase the abundance of Lactobacillus and some non-dominant bacteria that were related to amino acid metabolism and beneficial to human health, such as Eubacterium coprostanoligenes. These beneficial bacteria competitively reduced the abundance of harmful bacteria to protect the intestinal barrier and promote intestinal health, and upregulated the activities of aminopeptidase, proton-coupled oligopeptide transporter 1, and glutamate dehydrogenase at the transcription and translation levels. CONCLUSION: The compound powder could balance the abundance of intestinal microbiota, which may improve the metabolic capacity of old mice on a high-protein diet, and ultimately promoting the well-being of elderly individuals. © 2023 Society of Chemical Industry.

Konjac Glucomannan Aerogels Modified by Hydrophilic Isocyanate and Expandable Graphite with Excellent Hydrolysis Resistance, Mechanical Strength, and Flame Retardancy.

At present, biomass foamlike materials are a hot research topic, but they need to be improved urgently due to their defects such as large size shrinkage rate, poor mechanical strength, and easy hydrolysis. In this study, the novel konjac glucomannan (KGM) composite aerogels modified with hydrophilic isocyanate and expandable graphite were prepared by a facile vacuum freeze-drying method. Compared with the unmodified KGM aerogel, the volume shrinkage of the KGM composite aerogel (KPU-EG) decreased from 36.36 ± 2.47% to 8.64 ± 1.46%. Additionally, the compressive strength increased by 450%, and the secondary repeated compressive strength increased by 1476%. After soaking in water for 28 days, mass retention after hydrolysis of the KPU-EG aerogel increased from 51.26 ± 2.33% to more than 85%. The UL-94 vertical combustion test showed that the KPU-EG aerogel can achieve a V-0 rating, and the limiting oxygen index (LOI) value of the modified aerogel can reach up to 67.3 ± 1.5%. To sum up, the cross-linking modification of hydrophilic isocyanate can significantly improve the mechanical properties, flame retardancy, and hydrolysis resistance of KGM aerogels. We believe that this work can provide excellent hydrolytic resistance and mechanical properties and has broad application prospects in practical packaging, heat insulation, sewage treatment, and other aspects.

Effect of konjac oligo-glucomannan on emulsifying properties of myofibrillar protein.

BACKGROUND: The high viscosity of konjac glumannan (KGM) limits its application in meat processing. In this work, the effects of konjac oligo-glucomannan (KOG), as a derivative of KGM, on the emulsifying properties of myofibrillar protein (MP) and the related mechanism were investigated. RESULTS: It was found that the addition of KOG had no significant effect on the secondary structure of MP, but altered the tertiary conformation of MP, resulting in exposure of tyrosine residues to polar microenvironments and decreased intrinsic fluorescence intensity. In addition, the addition of KOG increased the emulsifying activity of MP, resulting in decreased particle size and improved physical stability of the emulsion. The emulsifying activity of MP reached the maximum value when 1.0 wt% KOG was added. Moreover, the interfacial tension and interfacially adsorbed protein content of MP/KOG emulsions decreased with the increase in KOG concentration. CONCLUSION: These findings demonstrated that KOG mainly interacted with MP and changed the amphipathy of the KOG-MP at the oil-water interface, forming a stable interface film to improve the emulsifying properties of MP. © 2023 Society of Chemical Industry.

Effects of Abelmoschus manihot gum content, heating temperature and salt ions on the texture and rheology properties of konjac gum/Abelmoschus manihot gum composite gel.

To improve the gelling property of konjac gum (KGM) and enhance the application value of Abelmoschus manihot (L.) medic gum (AMG), a novel type of gel was prepared using KGM and AMG in this study. The effects of AMG content, heating temperature and salt ions on the characteristics of KGM/AMG composite gels were studied by Fourier transform infrared spectroscopy (FTIR), zeta potential, texture analysis and dynamic rheological behavior analysis. The results indicated that the AMG content, heating temperature and salt ions could affect the gel strength of KGM/AMG composite gels. Hardness, springiness, resilience, G', G* and η* of KGM/AMG composite gels increased when AMG content increased from 0 to 2.0 %, but they decreased when AMG increased from 2.0 % to 3.5 %. High-temperature treatment significantly enhanced the texture and rheological properties of KGM/AMG composite gels. The addition of salt ions reduced the zeta potential absolute value and weakened the texture and rheological properties of KGM/AMG composite gels. Furthermore, the KGM/AMG composite gels could be classified as non-covalent gels. The non-covalent linkages included hydrogen bonding and electrostatic interactions. These findings would help understand the properties and formation mechanism of KGM/AMG composite gels and help improve the application value of KGM and AMG.

Comparative study on the effect of inhibitory methods on the color and gelation properties of alkali induced heat-set konjac gel from Amorphophallus bulbifer.

As a newly superior konjac variety, the Amorphophallus bulbifer (A. bulbifer) was easily browning during the alkali-induced process. In this study, five different inhibitory methods, such as citric-acid heat pretreatment (CAT), mixed with citric acid (CA), mixed with ascorbic acid (AA), mixed with L-cysteine (CYS), and mixed with potato starch (PS, containing TiO2), were separately used to inhibit the browning of alkali-induced heat-set A. bulbifer gel (ABG). The color and gelation properties were then investigated and compared. Results showed that the inhibitory methods had significant influences on the appearance, color, physicochemical properties, rheological properties, and microstructures of ABG. Among them, the CAT method not only significantly inhibited the browning of ABG (ΔE value dropped from 25.74 to 14.68) but also improved the water-holding capacity, moisture distribution, and thermal stability without damaging the textural properties of ABG. Moreover, SEM revealed that both CAT and adding PS methods could exhibit the more dense gel network structures of ABG than other methods. It was reasonable to conclude that ABG-CAT offered a superior method to prevent browning compared to the other methods based on the texture, microstructure, color, appearance, and thermal stability of the product.

Optimization of starch extraction from Amorphophallus paeoniifolius corms using response surface methodology (RSM) and artificial neural network (ANN) for improving yield with tenable chemical attributes.

The development of the extraction process for improving the starch yield from unconventional plants is emerging as a topic of interest. In this respect, the present work aimed to optimize the starch extraction from the corms of elephant foot yam (Amorphophallus paeoniifolius) with the help of response surface methodology (RSM) and artificial neural network (ANN). The RSM model performed better than the ANN in predicting the starch yield with higher precision. In this connection, this study for the first time reports the significant improvement of starch yield from A. paeoniifolius (51.76 g/100 g of the corm dry weight). The extracted starch samples based on yield - high (APHS), medium (APMS), and low (APLS) exhibited a variable granule size (7.17-14.14 µm) along with low ash content, moisture content, protein, and free amino acid indicating purity and desirability. The FTIR analysis also confirmed the chemical composition and purity of the starch samples. Moreover, the XRD analysis showed the prevalence of C-type starch (2θ = 14.303°). Based on other physicochemical, biochemical, functional, and pasting properties, the three starch samples showed more or less similar characteristics thereby indicating the sustentation of beneficial attributes of starch molecules irrespective of the variation in extraction parameters.

The intervention effects of konjac glucomannan with different molecular weights on high-fat and high-fructose diet-fed obese mice based on the regulation of gut microbiota.

Konjac is a high-quality dietary fiber rich in ß-glucomannan, which has been reported to possess anti-obesity effects. To explore the effective components and the structure-activity relationships of konjac glucomannan (KGM), three different molecular weight components (KGM-1 (90 kDa), KGM-2 (5 kDa), KGM-3 (1 kDa)) were obtained, and systematical comparisons of their effects on high-fat and high-fructose diet (HFFD)-induced obese mice were investigated in the present study. Our results indicated that KGM-1, with its larger molecular weight, reduced mouse body weight and improved their insulin resistance status. KGM-1 markedly inhibited lipid accumulation in mouse livers induced by HFFD by downregulating Pparg expression and upregulating Hsl and Cpt1 expressions. Further investigation revealed that dietary supplementation with konjac glucomannan at different molecular weights caused ß-diversity changes in gut microbes. The potential weight loss effect of KGM-1 maybe attributed to the abundance of changes in Coprobacter, Streptococcus, Clostridium IV, and Parasutterella. The results provide a scientific basis for the in-depth development and utilization of konjac resources.

Conformational changes and physicochemical attributes of texturized pea protein isolate-konjac gum: With a new perspective of residence time during extrusion.

The present study aimed to investigate the effects of different extrusion temperatures (110, 130 and 150 °C) and konjac gum addition (0.1 %, 0.2 %, and 0.3 %) on the flow behavior, physicochemical properties and microstructure of extruded pea protein isolate (PPI). The results showed that the textured protein could be improved by enhancing the extrusion temperature and adding konjac gum during extrusion. The water/oil holding capacity of PPI decreased and the SH content increased after extrusion. With temperature and konjac gum content increased, the ß-sheet of extruded proteins transformed to other secondary structural components, and Trp residue transformed to a more polar environment, illustrating the changes in protein conformation. All extruded samples presented as yellow hue with little green and higher lightness, while excessive extrusion process reduced the brightness and promoted more formation of browning pigments. Extruded protein showed more associated layered with some air pores, and its hardness and chewiness increased with the increase of temperature and konjac gum concentration. Cluster analysis showed that the addition of konjac gum could effectively improve the quality characteristics of pea protein under low temperature extrusion, and the effect was similar to that of high temperature extrusion product. With the increase of konjac gum concentration, the flow pattern of protein extrusion gradually converted from plug flow to mixing flow, and the disorder degree of polysaccharide protein mixing system was enhanced. Moreover, Yeh-jaw model showed better fitting effect in F(θ) curves compared to Wolf-white.

How the volatile organic compounds emitted by corpse plant change through flowering.

The corpse plant (Amorphophallus titanum) is so named because it produces a pungent, foul odor when flowering. Little is known about how the emitted volatiles change throughout the two-day flowering period. In this study, the comprehensive monitoring of the presence and change in volatile molecules during the female and the male flowering phases of A. titanum was conducted, and the plant temperature was monitored. A total of 422 volatile features were detected over the entire sampling period, of which 118 features were statistically significantly different between the pre-flowering and both flowering phases, and an additional 304 features were found present throughout the flowering period. A total of 45 molecules could be assigned putative names. The volatile profile of A. titanum changes over the two-day flowering period, with the S-containing molecules and aldehydes dominant in the female flowering phase, and the alcohols and hydrocarbons dominant in the male flowering phase. The two-dimensional gas chromatography time-of-flight mass spectrometry (GC × GC-TOFMS) enabled us to identify 32 new molecules produced by A. titanum. Each of these molecules alone, and in combination, likely contribute to the different odors emitted during the flowering phase of A. titanum.